BEGIN:VCALENDAR
VERSION:2.0
PRODID:-//pretalx//pretalx.kicad.org//GRNYRH
BEGIN:VTIMEZONE
TZID:CET
BEGIN:STANDARD
DTSTART:20001029T040000
RRULE:FREQ=YEARLY;BYDAY=-1SU;BYMONTH=10
TZNAME:CET
TZOFFSETFROM:+0200
TZOFFSETTO:+0100
END:STANDARD
BEGIN:DAYLIGHT
DTSTART:20000326T030000
RRULE:FREQ=YEARLY;BYDAY=-1SU;BYMONTH=3
TZNAME:CEST
TZOFFSETFROM:+0100
TZOFFSETTO:+0200
END:DAYLIGHT
END:VTIMEZONE
BEGIN:VEVENT
UID:pretalx-kicon-europe-2026-GRNYRH@pretalx.kicad.org
DTSTART;TZID=CET:20260908T091500
DTEND;TZID=CET:20260908T095500
DESCRIPTION:The DRAM shortage broke the typical setup for connecting device
 s to a CI HW lab. Dropping a Linux SoC next to every device under test use
 d to be cheap and easy. However\, there's another way: instead of connecti
 ng a computer per device\, we can share its USB over the network with USB/
 IP.\n\nThis talk will explain the design of such a board which is built ar
 ound an MCU that does not require DDR memory. Yet it still boasts USB 3.0 
 and Gigabit Ethernet\, along with a secure element that proves each bridge
  is genuine before the lab trusts it.\n\nWe walk through designing that bo
 ard entirely in KiCad: routing all the USB and Ethernet differential pairs
 \, handling the Ethernet magnetics\, placing the secure element\, and gene
 rating test points for easy QA checking.\n\nLastly we'll showcase the USB/
 IP demo of connecting a DUT to the Linux host.
DTSTAMP:20260921T061334Z
LOCATION:Main Stage
SUMMARY:Open hardware USB/IP bridge - Petr Hodina
URL:https://pretalx.kicad.org/kicon-europe-2026/talk/GRNYRH/
END:VEVENT
END:VCALENDAR